Page | 46
Save the env and boot the kernel:
OMAP3517EVM # saveenv
OMAP3517EVM # boot
4.4.2 Update the image in the NAND Flash
Preperation
Refer to NAND Flash Boot on p27
Update system image
Figure 11: NAND Flash Update Principles
To update the image in the NAND Flash you must input the commands into
the u-boot shell, please refer to the following steps:
Updating the x-loader boot image
Input the following commands into the u-boot shell to update images on the
SD card:
mmc init
fatload mmc 0 80000000 x-load.bin.ift_for_NAND
nand erase 0 80000
nandecc hw
nand write.i 80000000 0 $filesize
Updating the u-boot boot image
Comments to this Manuals