Page | 61
5.2 WinCE System Quick Start
5.2.1 System boot
When you boot the board and operate the system, you may use Hyper
terminal software with the following settings:
Baud rate: 115200
Data bit: 8
Parity check: no
Stop bit: 1
Flow control: no
5.2.2 Boot from NAND Flash
Please refer to p67
5.2.3 Boot from SD card
Copy the image files MLO, EBOOTSD.nb0, and NK.bin from the
CD:\WinCE\image\ VGA_1024x768(lcd_800x480 or lcd_480x272)\SD
directory to the SD card.
To switch to SD card, you need to short J24.
Note:
The method to update the image from the SD card will be shown in 5.4.1
Updating the image on the SD card p67
Comments to this Manuals