Embest AM3517 User Manual download pdf (Page 31)

3.2 3.7 Test on network

The board has a 10/100M self-adapting network card DM9000; users can connect the board to the

LAN and enter the following commands for a test:

[root@OMAP3EVM /]# ifconfig eth0 192.192.192.201

eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:00, id=7c0f1)

[root@OMAP3EVM /]# PHY: ffffffff:00 - Link is Up - 100/Full

[root@OMAP3EVM /]# ping 192.192.192.90

PING 192.192.192.90 (192.192.192.90): 56 data bytes

64 bytes from 192.192.192.90: seq=0 ttl=128 time=5.005 ms

64 bytes from 192.192.192.90: seq=1 ttl=128 time=0.396 ms

64 bytes from 192.192.192.90: seq=2 ttl=128 time=0.305 ms

64 bytes from 192.192.192.90: seq=3 ttl=128 time=0.305 ms

64 bytes from 192.192.192.90: seq=4 ttl=128 time=0.305 ms

Warning: user may change IP address, press ctrl+c to quit.

3.2 3.8 Test on camera

Connect camera module (Option) and CCD camera well, and execute following commands to test

after entering the system.

[root@OMAP3EVM /mnt]# saMmapLoopback

Capture: Opened Channel

Capture: Current Input: Composite

Capture: Input changed to: Composite

Capture: Current standard: NTSCvpfe-capture vpfe-capture: width = 720, height = 480, bpp = 2

vpfe-capture vpfe-capture: adjusted width = 720, height = 480, bpp = 2, bytesperline = 1440,

sizeimage = 691200

Capture: Number of requested buffers = 2

Capture: Init done successfully

Display: Opened Channel

Display: Capable of streaming

Display: Number of requested buffers = 3

Display: Init done succetvp514x 3-005d: tvp5146 (Version - 0x03) found at 0xba (OMAP I2C

adapter)

ssfully

Display: Stream on...

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 75 76

No comments

Embest AM3517 User Manual Page 31